Windows & Doors in Moose Creek: Farm Homes of North Stormont

Moose Creek is a village in the Township of North Stormont, on Highway 138 just south of the 417, with a main street, a couple of churches, a community centre and dairy farms in every direction. It takes its name from the creek that runs through it and, the local story goes, from the hunters who once followed moose along its banks. Unisson Groupe now brings factory-direct windows and doors here: measured in your kitchen, built in our Saint-Laurent plant, installed by our own crews.

Why Unisson now serves Moose Creek

Moose Creek is one of the easiest places in Eastern Ontario for us to reach: the village is a couple of minutes off the Highway 417 interchange with Highway 138, roughly 130 km and about an hour and twenty minutes from our factory in Saint-Laurent. That access is what made it a natural early stop when we extended our service area west along the Ottawa River corridor into Prescott-Russell, Glengarry and North Stormont.

Being a factory-direct manufacturer changes what you are buying. The estimator who measures your openings, the plant that welds your frames and the crew that installs them are all Unisson, working under one RBQ licence (5670-0248) and one written warranty. There is no dealer margin built into the price, and there is no gap between supplier and installer where responsibility can fall through when a sill leaks in the spring thaw.

North Stormont is a community where French and English are both spoken at the hardware store and the arena, and a large share of families in and around Moose Creek speak French at home. Our estimators and crews are bilingual, so your quote, your contract and installation day happen in the language you choose.

Homes in Moose Creek: farmhouses, bungalows and wind

The homes we see around Moose Creek fall into a few clear groups. On the concession and side roads are the farmhouses, many of them brick or clapboard from the late 1800s and early 1900s, often extended over the decades with a kitchen wing or a mudroom that has its own generation of windows. In the village itself are bungalows and one-and-a-half-storey homes from the 1950s to the 1980s, and toward the highway some newer builds from the 1990s and 2000s. Each has a different weak point.

In the farmhouses, drafts come through the space between an old wood frame and the rough opening, and rot shows up at the sill, the brickmould and the bottom rail of the sash where meltwater sits every March. In the mid-century homes, aluminum sliders and single-pane picture windows conduct cold straight through the frame, and frost on the inside of the glass is a January fixture. In the 1990s and 2000s houses, first-generation vinyl sealed units are reaching the age where argon has escaped and fog appears between the panes on cold mornings.

Weather is the constant. North Stormont is flat, open dairy country with few windbreaks, so a north-west wind in February drives cold air against every seal and piles drifting snow against the exposed side of the house. Nights reach -30 °C, summers are humid, and March and April deliver weeks of freeze-thaw that work on caulking and frame joints. That is why we specify fusion-welded UPVC frames, compression seals and warm-edge spacers as the baseline rather than an upgrade.

• Farmhouses: perimeter drafts, sill and brickmould rot, mismatched windows from several eras
• 1950s–80s village homes: aluminum sliders, single-pane picture windows, interior frost
• 1990s–2000s builds: first vinyl generation, fogged sealed units, stiff hardware
• Climate stress: -30 °C nights, open-field wind, drifting snow, spring freeze-thaw

Which windows and doors fit here

For most Moose Creek homes we propose UPVC casement and awning windows with multi-point locks and compression seals, which shut tighter against wind than any slider. On a farmhouse, an awning window in the kitchen and casements elsewhere let you ventilate in a summer rain without water coming in. Our hybrid windows, UPVC inside with an aluminum-clad exterior, suit a brick farmhouse where you want a painted colour that holds up to sun and grit on the road side.

Triple glazing is our default recommendation in North Stormont. Three panes with two low-E coatings and argon fill keep the interior glass surface warmer, which cuts frost and condensation on the coldest nights and makes the room by the window comfortable instead of the coldest spot in the house. All our windows are ENERGY STAR certified to Canada's single national specification in force since 2020: U-factor of 1.22 W/m²·K or lower, or Energy Rating of 34 or higher.

Doors take a beating on a farm property. Our insulated steel and fibreglass entry doors come with adjustable thresholds, multi-point locks and durable weatherstripping for the side door that sees boots, dogs and feed bags all winter. Our patio doors use the same triple low-E glazing as the windows and stainless rollers that tolerate gravel and sand.

• UPVC casement / awning: compression seals, multi-point locks, fusion-welded corners
• Hybrid UPVC-aluminum: painted exterior for brick farmhouses and road-facing walls
• Triple glazing: two low-E coatings, argon fill, warm-edge spacer
• Entry & patio doors: insulated cores, adjustable thresholds, ENERGY STAR glazing

Ontario specifics: code, permits and rebates

Our work in Ontario follows the Ontario Building Code, whose 2024 edition has been in force since early 2025. For replacement windows in an existing opening, the code's energy requirements mostly target new construction, and an ENERGY STAR triple-glazed unit exceeds what the code asks of a new home in this climate. Where the code matters day to day is egress: a basement bedroom window must still provide the required clear opening after replacement, and we check that at the measurement visit.

Permits are set by the municipality. A like-for-like replacement in the same opening generally does not require a building permit in Ontario, while enlarging an opening, adding a window in a load-bearing wall or changing a basement egress window usually does. For Moose Creek, we suggest a quick call to the North Stormont building department before work begins, and we can supply drawings if the township requires them.

The main rebate open in Ontario at the time of writing is the Home Renovation Savings Program, delivered by Save on Energy and Enbridge Gas with provincial support. It has offered a fixed amount per ENERGY STAR window or door opening, on condition of a home energy assessment and at least two eligible upgrades done together, such as windows with insulation or air sealing. Natural gas is not available on every road in North Stormont, and the program has run a separate stream for homes heated with electricity, propane, oil or wood. Conditions and deadlines change, so confirm your eligibility with the program before you count on it.

How it works from our Montreal factory

Everything starts with a free in-home estimate. Our estimator comes out from Saint-Laurent, measures every opening, inspects frames, sills and any rot, and reviews frame types, glazing and colours with you. You receive a written quote by email, in French or English, with no obligation.

Once approved, your windows and doors are manufactured in our own Saint-Laurent factory, typically in 6 to 10 weeks depending on the season and the number of units. Delivery and installation are done by our own crews, usually in one or two days for a typical house: old units removed, openings insulated and foamed, new units set level and secured, exterior capped or trimmed and interior finished before we leave.

Because we make and install, one written warranty covers both product and workmanship, with the frame, the sealed glass unit and the hardware described separately. Financing is available online with payments over 12 to 240 months, which lets a farmhouse with a dozen mismatched windows be done in one project instead of several.

• Step 1: free in-home measurement and written quote
• Step 2: manufacturing at our Saint-Laurent factory, typically 6–10 weeks
• Step 3: delivery and installation by our own crews, usually 1–2 days
• Step 4: one warranty for product and installation, financing over 12–240 months

Frequently Asked Questions